Header Hardware And Header Bolts

Our header bolts are offered in stainless steel and black oxide finished steel with 12-point heads. Drilled heads for safety wiring are also available.

3/8" - 16

.750"

3/8" - 16

.875"

3/8" - 16

1.000"

5/16" - 18

.750"

5/16" - 18

.875"

5/16" - 18

1.000"

Header tabs are available in stainless steel or mild steel and are sold as sets with the bolt and nut. The set includes (2) tabs (one standard and one reduced shoulder height), (1) bolt and (1) nut. Stainless sets include stainless nut and bolt.

• Stainless steel: $14.95
• Mild steel: $9.95

Type 308 (typically used for welding 304 stainless)

1/4 pound

$3.75

Type 309 (typically used for welding 304 stainless to mild steel)

1/4 pound

$3.75

Type 347 (typically used for welding 321 stainless steel)

1/4 pound

$4.75

Type 7052 (typically used for welding mild steel)

1/4 pound

$2.95

---- image placeholder ----

18mm x 15 straight end

18mm x 15 radius end

1/8" NPT

1/4" NPT

3/8" NPT

1/2" NPT

Stainless Safety Wire

The image to the left shows the proper way to safely wire two bolts together. Using this method reassures bolt security. Notice that the safety wire is installed in such a way that the bolts are secured in the tightening direction at all times.

• .032 25' Roll: $2.95
• .032 1# Roll: $10.45

  For proper safety wiring techniques see:    

   SAFETY WIRE TECHNIQUES

Safety Wire Pliers

These pliers make it a snap to put the proper twist into safety wire. Squeeze the handle, press the lock, and pull. To release simply press the handle again.

• 6" pilers   $16.95
• 9" Pliers   $19.95